Inner diameter: 59 mm
Outer diameter: 69 mm
Cross section = 5 mm
Quantity: 5 Pcs
Fluororubber has excellent resistance to chemicals, acids and fuel as well as high temperature.
The temperature range for this material is 5 degree Fahrenheit to 400 degree Fahrenheit (-15 degrees Celsius to 204 degrees Celsius).
Please check our store for other sizes. If you cannot find what you need in the store, please do not hesitate to contact us at anytime.
Please note that the product picture is for reference purposes only and may not depict the exact item and size you are purchasing.
If you have any questions, please do not hesitate to contact us at anytime.

11/16" - 24 Unified Right Hand Thread Die
M6 x 1.0 x 12mm, Hole 3.2mm Socket Cap Head Hollow Through Hole Screws
2 Pcs ??16 x 35mm Hexagon Socket Head Shoulder Bolts
Tungsten Carbide Cone flat end Rotary Burr Single-cut 16 x 6mm
Tungsten Carbide Cone flat end Rotary Burr Single-cut 10 x 20mm
Tungsten Carbide Cone flat end Rotary Burr Single-cut 6 x 14mm
Tungsten Carbide Cone flat end Rotary Burr Single-cut 10 x 5mm
20 Pcs M3 x 0.5 x 14mm Half Dog Point Socket Set / Grub Screws Steel
Tungsten Carbide Cone flat end Rotary Burr Single-cut 8 x 4mm
Tungsten Carbide 90 degree included angle Rotary Burr Single-cut 8 x 4
M65 x 1.5 HSS Right Hand Thread Tap
M62 x 1.5 HSS Right Hand Thread Tap
M48 x 2.0 Thin Hex Jam Left hand Thread Nut 1 Pcs Stainless Steel
2Pcs M10 x 1.5 x 20mm 304 stainless steel Half Dog Point Socket Set /
Tungsten Carbide Cone flat end Rotary Burr Single-cut 12 x 20mm
Tungsten Carbide Round edge Rotary Burr Single-cut 16 x 6mm
10 Pcs ??5 x 6mm Hex Socket Head Shoulder Screw Bolts Stainless Steel
60 x 18 mm T Slot Cutter Carbide Tip
M20 x 1.25 HSS Metric Left Hand Thread Tap
3/4" - 16 UNF 2 Pcs Steel Slotted Hex Castle Nuts
Tungsten Carbide Cone radius end Rotary Burr Double-cut 10 x 25mm
M20 x 2.0 HSS Metric Left Hand Thread Tap
2 Pcs M8 x 1.25 x 40mm Half Dog Point Socket Set / Grub Screws Steel
M65 x 4.0 HSS Right Hand Thread Tap
M20 x 1.0 HSS Right Hand Thread Tap
M64 x 3.0 HSS Metric Left Hand Thread Tap
2 Pcs ??16 x 45mm Hexagon Socket Head Shoulder Bolts
M63 x 3.0 HSS Right Hand Thread Tap
M5 Module Bevel Gear Cutter No.1
PA20 M0.6 OD 50mm Gear Hob Cutter
60 x 3 mm T Slot Cutter Carbide Tip
2.0mm Wire diameter 10mm OD 120 Angle RH Torsion Spring 2 Pcs
M20 x 1.5 HSS Metric Left Hand Thread Tap
3.2 x 5.9mm HSS Straight Shank Socket Cap Screw Counterbore
Cutting Diameter 2mm Overall Length 51mm 2 Flute HSS-AL End Mill Cutte
M20 x 0.5 HSS Right Hand Thread Tap 


Reviews
There are no reviews yet.